| T O P I C R E V I E W |
| Hefhoover |
Posted - 20/01/2008 : 21:17:56
Hi all, first posting on here, so please be gentle with me 
I've got a "Vickers" permag motor from a Whirlpool washing machine and I've done a few tests on it.
I'd like to charge some 12V batteries for a remote stable, so there would not be a heavy demand for power.
I spun it up at work with a cordless drill and electronic rev counter to check the outputs and these are the readings I got.>
It pushed out :-
9A @ 680RPM.
13.6v @ 770 RPM
15.3v @ 850 RPM **DC Voltages**
20v @ 1100 RPM
Would this motor be up to the job in hand and if so what type of overcharging control would I need?
If this sounds like a suitable motor to use, I'll post more details (model, dimensions etc) as to where more of them can be found for anyone interested.
Many Thanks in anticipation, Hef 
|
| 7 L A T E S T R E P L I E S (Newest First) |
| Hefhoover |
Posted - 23/01/2008 : 20:50:50
Many thanks for your help, Hef |
| ghurd |
Posted - 23/01/2008 : 17:15:35
They would work, but it would take some pretty decent wind to get past 800RPM.
And that is pretty darn fast for PVC.
Might try trimming the trailing edge down a little.
Wood is usually faster.
G- |
| Hefhoover |
Posted - 22/01/2008 : 22:20:27
Cheers Glenn, Would the plastic blades be unsuitable for this do you think, as the shaft dia is only 9.5mm, I was hoping to go for lightness. Hef |
| ghurd |
Posted - 22/01/2008 : 05:30:50
I have done it with worse!
Might try some fast 30 or 32" diameter wood blades.
Probably a good way to get a first project done.
G- |
| Hefhoover |
Posted - 21/01/2008 : 21:33:47
I've got more details from the rating plate if anyone's interested, but forgot to take photos (must try harder!)
Vickers Polymotor-Italy.
D.C.P.M Motor A1 M02 Class.E
22 5 110 800 85
V___
- - A W RPM %Duty
200 1.8 360 10500 15
Output shaft diameter is 9.5mm
Cheers, Hef. |
| Hefhoover |
Posted - 20/01/2008 : 21:57:29
Thanks for that, I'll try to pop some photos of the motor and some more details up tomorrow. Hef |
| gotwind |
Posted - 20/01/2008 : 21:30:09
Hi Hefhoover.
13.6v @ 770 RPM is fast for a wind propeller, half that speed would be good.
9A @ 680RPM sounds interesting?
Your motor maybe good for 6v battery charging - Further info would be useful, pictures are also helpful.
Here's how to post images.
Cheers
Ben. |
